The Raptor G4 wind turbine blades are made from revolutionary carbon fiber composites (used by the aircraft industry) – The same material used in the F-22 Raptor fighter jet.

• Designed for high speed, high efficiency, affordability and durability.
• Our Raptor Generation 4 blades can last 75 years in the sun! Made to withstand extreme heat and sub-zero temps.
• They are rated to withstand 125 mph winds and are designed to operate real PMAs (permanent magnet alternators) at high speed in low winds to create the maximum power a PMA can put out. Our precision, aerodynamically tapered blades feature a 5.5 mph start up speed.
• Our superior Raptor Generation 4 blades can be used on Air-X or other wind turbines to increase low wind start-up, power production, and improve safety from plastic/PVC blades.

We’ve tested many blades on the market and have concluded that our Raptor Generation 4 Wind Turbine Blades are hands down the best for durability, performance, aesthetics, and overall value. Upgrade Your Wind Turbine Blades and See the Difference!

Raptor Generation 4 Blade Specifications:

• Blades weigh approximately 1 pound each
• Weighed for density
• Perfectly balanced
• Ran to strict specifications and procedures
• Reinforced and impact resistant
• Cooled to avoid warping
• QC gauged 100% for size
• Inspected for flaws and appearance at three points
• Resistant to ultraviolet light (UV protected)! Will NEVER crack or degrade
• Clockwise rotation
• Limited Warranty
• Made in the USA

Dimensions:

• Each blade is 29″ long
• Blade base is 6″ wide
• Blade tip is 1 1/8″ wide
• Mounting bolt holes are 0.245″ and the bolt holes are 15/16″ apart center to center
• 59″ (1.50 Meters) Assembled Diameter