This mono solar panel kit includes a pair of solar panel MC4 connectors to wire up to the included PWM charge controller. The charge controller is an absolute necessity for any battery or battery bank to keep from overcharging. The charge controller automatically stops the charging from the solar panel when the battery becomes full and allows the solar panel to recharge the battery when the voltage drops.
The PWM charge controller has two battery input terminals, two solar panel input terminals, and two load terminals. The load terminals are for running various DC loads like lights or our solar grid-tie inverters. It has full self-protection, protection of overload, short circuit, reverse connection, overcharging and over discharging, etc.
The aluminum solar panel z clips allow easy mounting to any surface.
It’s also expandable! Great news, if you add on to this Solar Panel Starter Kit, the charge controller will automatically detect a 24-volt system!
All you need is full to partial sunlight to keep your stationary or mobile equipment running!
Solar Panel Electrical Specifications:
| Maximum Power (Pmax) | 100 Watts |
| Maximum System Voltage | 600 VDC |
| Optimum Operating Voltage (VMP) | 19.12 Volts |
| Optimum Operating Current (IMP) | 5.23 Amps |
| Open Circuit Voltage (VOC) | 23.1 Volts |
| Short Circuit Current (ISC) | 5.59 Amps |
| Operating Temperature | -40°C to +85°C |
| Maximum Series Fuse Rating | 15A |
Solar Panel Mechanical Specifications:
| Cell Size | 6.54 x 3.27 in (166 x 83 mm) |
| Solar Panel Dimensions | 31.89 x 28.15 x 1.38 in (810 x 715 x 35 mm) |
| Number of Cells | 36 |
| Weight | 15.4 lbs (7 kg) |
| Mounting Hole Dimensions | 0.35 x 0.55 in (9 x 14 mm) |
| Cable Length | 47.2 in (1200 mm) |
| Connector Type | MC4 Compatible |
| Junction Box | IP65 |
| Rated Snow / Wind Load | 50 lbs/ft2 |
Reviews
There are no reviews yet.