Compare Our Freedom Generation 4 Wind Turbines:

The 500 Watt Wind Turbine Kit from SES, assembled in the USA, offers a robust solution for various energy needs. Here’s a comprehensive overview of what you get with the kit:

Key Features:

• Blades:
  • Options: 5 or 7 Raptor Generation 4 Wind Turbine Blades
  • Diameter: Assembled blades are 60 inches
  • Performance: Blades designed to avoid overloading the PMA at low RPMs, enabling faster turns for more amps
• Alternator:
  • Type: 500 Watt Permanent Magnet Alternator
  • Shaft: Standard 17 mm
  • Rotor Design: 100% solid core zinc-plated with airflow holes for cooler operation
  • Bearing Life: Rated for 125,000 hours+, with replacement bearings costing only $5.00
• Housing & Construction:
  • Material: 3/16” thick steel (not aluminum or plastic)
  • Finish: Zinc Plated or Powder Coated
  • Anti-Corrosion: Housing bolts treated with anti-seize to prevent dissimilar metal corrosion
• Operation:
  • Wind Speeds: Efficient start-up in zone 2 winds or higher, especially with Raptor G4 blades
  • Power Output: Above 500 watts in zone 2 winds or higher
• Rectifier Options:
  • AC Output Models: Includes a 3-phase AC to DC bridge rectifier that can be installed next to batteries or inverter for a 3-phase cable run down the tower
  • DC Output Models: Features a built-in 3-phase AC to DC bridge rectifier for a two-wire run to the charge controller or batteries
• Tail Fin & Arms:
  • Material: 16 gauge powder-coated steel
  • Dimensions: Measures 13 x 19 inches
  • Design: Double tail arms
  • Mounting: Fits on 1.5″ schedule #40 or #80 pipe
  • Warranty: Limited Warranty
• Uses:
  • Battery or battery bank charging
  • Stackable wind turbine grid tie inverters
  • Direct DC water heating elements
  • Direct DC resistive heating
  • Other applications where 3-phase AC or DC can be utilized

Raptor Generation 4 Wind Turbine Blade Specifications:

• Material: Revolutionary carbon fiber composites, the same used in the F-22 Raptor fighter jet
• Durability: Rated to withstand 125 mph winds, designed for high speed, high efficiency, affordability, and durability
• Lifespan: Can last up to 75 years in the sun, resistant to extreme heat and sub-zero temperatures
• Weight: Each blade weighs approximately 1 pound
• Balance: Perfectly balanced to reduce vibration, cooled to avoid warping
• Impact Resistance: Reinforced and impact resistant
• UV Protection: UV protected to prevent cracking or degradation
• Rotation: Clockwise rotation
• Warranty: Limited Warranty
• Made in the USA

G4 Wind Turbine Blade Dimensions:

• Length: Each blade is 29 inches
• Base Width: 6 inches
• Tip Width: 1 1/8 inches
• Mounting Bolt Holes: 0.245 inches, 15/16 inches apart center to center